FREE: HC-SR501 IR Pyroelectric Infrared IR PIR Motion Sensor Detector Module

The listing, HC-SR501 IR Pyroelectric Infrared IR PIR Motion Sensor Detector Module has ended.

It is a HC--SR501 Sensor Module

With an operating voltage of 5v to 20v

Operating voltage. It has a high value of 3.3 volts and a low of 0 (it is either on or off). It's delay time can be adjusted from 5 to 200seconds as well as the sensing range from 3meter to 7meters. The entire sensor with the board is 32mm by 24mm (standard pir motion sensor). The sensor either gives off a 3.3volt high value when motion is detected and then resumes or continues to give off a 0 voltage when no motion is detected. If you use an arduino or other micro controllers you can use the 3.3 volt out to power the sensor or use the 5volt power pin (vcc) to power the sensor. Either one will work.


Working voltage range: DC 4.5-20V

Static current: <50uA

High level output: 3.3 V / low 0V

Trigger mode: L unrepeatable trigger /H repeated trigger (Default Repeating trigger)

Delay time: 0.5-200S (adjustable) can be produced range 0.1 seconds - a few minutes

Blocking time: 2.5S (the default) can be produced range 0.1 seconds, tens of seconds

Size: 32mm*24mm circuit board

Induction angle: <100 degree cone angle

Working temperature: -15-+70 degrees

Induction of lens size: diameter: 23mm (default)

Shipping in 3-5 working days via Unregistered Airmail from Hong Kong, SO CAN'T TRACK ONLINE
Delivers in 4-7 business weeks.
All payments are protected by Listia.
Thank you, Have a nice day!